111 Series Industrial Fence

111 Series Style #111 is a version of Style #111 that is constructed to accept Imperial or Majestic finials instead of the standard picket points. 6 foot wide sections with 3 or 4 1in Sq. rails, 5/8in sq pickets.

111 series sections require decorative finials that are purchased seperatly.
Click here to see finial styles.

Available Finishes:
White, Black, Bronze



48" High - 101 Industrial

  • Sections1
    • 6 foot wide.........................$133/ Each
  • Standard Posts
    • 2.5" Sq. line, end, corner...$31/ Each
  • Gate Posts2
    • 4" Sq. Gate Post..................$85 / Each
    • 6" Sq. Gate Post...............$245 / Each
  • Gates Gate
    • 36" wide.............$295
    • 48" wide.............$335
    • 60" wide.............$410
    • 72" wide.............$446

60" High - 101 Industrial

  • Sections1
    • 6 foot wide.........................$148/ Each
  • Standard Posts
    • 2.5" Sq. line, end, corner...$33 / Each
  • Gate Posts2
    • 4" Sq. Gate Post...............$105 / Each
    • 6" Sq. Gate Post...............$245 / Each
  • Gates Gate
    • 36" wide.............$330
    • 48" wide.............$370
    • 60" wide.............$460
    • 72" wide.............$500

72" MOD - 101 Industrial Pool Code

  • Sections1
    • 6 foot wide........................$167/ Each
  • Standard Posts
    • 2.5" Sq. line, end, corner...$40 / Each
  • Gate Posts2
    • 4" Sq. Gate Post...............$105 / Each
    • 6" Sq. Gate Post...............$245 / Each
  • Gates Gate
    • 36" wide.............$370
    • 48" wide.............$420
    • 60" wide.............$500
    • 72" wide.............$545

96" High - 101 Industrial Pool Code

  • Sections1
    • 6 foot wide.........................$245/ Each
  • Standard Posts
    • 2.5" Sq. line, end, corner...$55/ Each
  • Gate Posts2
    • 4" Sq. Gate Post...............$140/ Each
    • 6" Sq. Gate Post...............$245/ Each
  • Gates Gate
    • 36" wide.............$450
    • 48" wide.............$550
    • 60" wide.............$610
    • 72" wide.............$665
Heights with a star next them meet pool code. Any style that is under 60" also required a magna latch

Specifications

  • Pickets: 1 " Sq. x .062"
  • Horizontal Rails: 1 5/8 " x 1 5/8 " | Side Walls: .100" | Top Wall: .070"
  • Standard Posts: 2 1/2 " sq. x .075"
  • Gate Posts: 4 " sq. x .125"
                       6" sq. x .125"
  • Spacing between pickets: 4 "
  • Maximum Post Spacing: 71 1/2" on center
  • Weight supported by section: 1000+ lbs
  1. Sections are shipped fully assembled. Actual fence height shown is actual length of pickets. Post spacing is 71 1/2 " on center. Sections can rake about 12 " over 6' span.
  2. Use Gate Posts on both sides of gates. 4" posts are recommended for over 24 sq. ft. in size. Multiply width x height to get Sq. Ft.
  3. Swing Gates are preassembled and include self-closing and self-latching hardware. Double drive gates up to 12' wide can be made using two of the gates listed above. Two drop bar's are provided at no additional charge when a double drive gates is ordered.