Kensington Aluminum Ornamental Fence
Kensington Aluminum Fence
Kensington has finial picket tops. The pickets do not extend below the bottom rail. Larger components are used to fabricate this fence for both strength and a more stately appearance.
Available Colors
Black White Bronze
60" & 72" high Kensington meet pool code  

48" High - Kensington

  • Sections1
    • 6 foot wide.........................$118/ Each
  • Standard Posts
    • 2" Sq. line, end, corner......$25 / Each
  • Gate Posts2
    • 2" Sq. Gate Post..................$40 / Each
    • 4" Sq. Gate Post..................$85 / Each
  • Gates Gate
    • 36" wide.............$290
    • 48" wide.............$340
    • 60" wide.............$390
    • 72" wide.............$430
  • Accent Gates Accent Gate
    • 36" wide.............$555
    • 48" wide.............$575
    • 60" wide.............$630

60" High - Kensington Pool Code

  • Sections1
    • 6 foot wide........................$127/ Each
  • Standard Posts
    • 2" Sq. line, end, corner......$27 / Each
  • Gate Posts2
    • 2" Sq. Gate Post..................$43 / Each
    • 4" Sq. Gate Post...............$105 / Each
  • Gates Gate
    • 36" wide.............$340
    • 48" wide.............$380
    • 60" wide.............$435
    • 72" wide.............$470
  • Accent Gates Accent Gate
    • 36" wide.............$575
    • 48" wide.............$600
    • 60" wide.............$655

72" High -KensingtonPool Code

  • Sections1
    • 6 foot wide.........................$146/ Each
  • Standard Posts
    • 2" Sq. line, end, corner......$33 / Each
  • Gate Posts2
    • 2" Sq. Gate Post..................$51 / Each
    • 4" Sq. Gate Post...............$105 / Each
  • Gates Gate
    • 36" wide.............$370
    • 48" wide.............$415
    • 60" wide.............$475
    • 72" wide.............$500
  • Accent Gates Accent Gate
    • 36" wide.............$590
    • 48" wide.............$615
    • 60" wide.............$670

Heights with a star next them meet pool code. Any style that is under 60" also required a magna latch

Specifications

  • Finial Top Pickets (Finials included): 3/4 " Sq. x .050"
  • Horizontal Rails: 1" x 11/2" | Side Walls: .082" | Top Wall: .055"
  • Standard Posts: 2" sq. x .060"
  • Gate Posts: 2" sq. x .125"
  • Spacing between pickets: 3 31/32"
  • Maximum Post Spacing: 72" on center
  • Weight supported by section: 350lbs
  1. Sections are shipped fully assembled. Actual fence height shown is actual length of pickets. Post spacing is 72" on center. Sections can rake about 12" over 6' span.
  2. Use Gate Posts on both sides of gates. 4" posts are recommended for over 24 sq. ft. in size. Multiply width x height to get Sq. Ft.
  3. Swing Gates are preassembled and include self-closing and self-latching hardware. Double drive gates up to 12' wide can be made using two of the gates listed above. Two drop bar's are provided at no additional charge when a double drive gates is ordered.